MB E-Z Pol Polishing Powder

MB-22® E-Z Terrazzo Polishing Powder

The MB-22® E-Z Polishing Powder is a superior wet polishing powder that delivers a high shine and dazzling gleam. Formulated for terrazzo and calcite-based stones, this polishing powder won’t etch surfaces with splatter.

Available Sizes

• 1 lb
• 2 lbs
• 10 lbs
• 25 lbs

You can call us for the pricing of quantities above 25 lbs.

Applications

The MB-22® E-Z Polishing Powder is specifically formulated to deliver a high shine and dazzling gleam, making it an ideal solution for polishing terrazzo and calcite-based stone.

• Terrazzo Flooring: Ideal for polishing large terrazzo floor areas in commercial and residential buildings.
• Calcite-Based Stones: Effective on various calcite-based stones, including marble, limestone, and travertine, offering a dazzling gleam and high shine finish.
• Natural Stone Surfaces: While it’s optimized for terrazzo and calcite-based stones, it can also be used on a variety of natural stone surfaces needing a polished finish, provided the stone’s characteristics are compatible with the product’s formulation.
• Countertops: Suitable for calcite-based stone countertops, providing a high shine and glossy finish that revitalizes the appearance of kitchens, bathrooms, and commercial spaces.
• Indoor and Outdoor Use: Versatile enough for both indoor and outdoor terrazzo surfaces.

What Does MB-22® Polishing Powder Do?

MB-22® E-Z Polishing Powder is formulated to enhance the finish of terrazzo and calcite-based stones. 

• Restores Shine: It brings back the natural shine and gloss of the stone surface that can dull over time due to wear and environmental factors.
• Smooths Surface: MB-22® smooths the stone surface, removing minor imperfections, and contributing to a more uniform and reflective finish.
• Enhances Durability: By polishing the surface, MB-22® also helps to protect it against further wear and tear, making the stone more durable and long-lasting.How to Make Terrazzo Shine

To make your terrazzo shine, use MB-22® E-Z Polishing Powder, designed specifically for terrazzo and calcite-based stones. Start by preparing the surface; ensure it is clean and honed to the highest clarity possible. Then, apply MB-22® according to the directions provided in the next section.

How to Use MB-22® Terrazzo Polishing Powder

Different stones require different polishing techniques. In general, you would need to:

• Prepare the surface. Hone it to the highest clarity possible.
• Apply proper masking materials to areas of the surface that can be damaged by splatters.

Below are the specific directions for buffing terrazzo floors and countertops:

Polishing Terrazzo Floors

• Target an area of approximately 10 sq. ft.
• In the middle of the target area, sprinkle approximately 2 oz. of product in a circular pattern slightly smaller than the diameter of the floor machine.
• Using a hog’s hair pad, position the floor machine with water on top of the powder.
• The machine cannot exceed 175 RPM for best results and needs at least 1.5 HP.
• Release 5 seconds of water and swiftly swing the machine back and forth over the targeted area to evenly spread the slurry. (Note: keep the slurry thick; not too wet.)
• Polish slowly with a spiral motion moving from one end of the targeted area to the other and back.
• Continue polishing for 3-4 minutes.
• Then check the surface with a squeegee. You should have a high polish at this point.
• Next release just enough fresh water onto your target area to make vacuuming the used slurry easy.
• Then clean with a neutral cleaner such as MB-1 Floor Amore One Step Cleaner or MB-15 Stone Glow.
• Now repeat this process on next section.

Polishing Terrazzo Countertops

• Target an area approximately 4 sq. ft.
• On the targeted surface, sprinkle 1 tablespoon of product in a circular pattern slightly smaller than the polishing pad you are using.
• Spray some water on the powder and over the rest of the targeted area.
• Set the speed of the right-angle grinder/polisher (variable speed is a MUST) to the slowest speed.
• Using a hog’s hair pad, move the machine over the targeted area slowly, applying steady pressure.
• Check the surface for results after approximately 2 minutes.
• If you have a high polish, semi-flush the section and pull the slurry down to next section and repeat.

Coverage: Depending on the type of stone, expect coverage of approximately 125 – 200 sq ft per pound.